Weighing beams

• Adaptable weighing solution thanks to its flexibility: You can separate the beams up to 4 meters apart to adapt to the item you want to weigh. For instance, suitable to weigh special-sized pallets or long items such as metal bars.
• Built in epoxy coated steel, which offers durability and a certain degree of protection against corrosion
• Each bar is fitted with two load sensors on each end of the beam.
• OIML R-60 class C load sensors built in nickel-plated steel, IP67 protection
• Height adjustable feet to adapt to slightly irregular surfaces
• Scale is not suitable for humid environments. Visit our Washdown section for durable waterproof scales here.

RX Indicator

• LED display with 20 mm in height digits
• ABS casing with IP-54 protection (use in wet environments is not advised)
• 4 metres of cable between platform and indicator
• Fast weighing response: in less than 2 seconds shows a stable, accurate weight

Zero adjustment

Set scale to 0 when plate is empty but the scale shows a marginal weight reading

Tare function

Reset the balance display to zero after placing a container on the scale. It allows you to tare the container, then proceed to measure only net weight.

Direct power supply cable
(230 V / 50 Hz (Euro) 11 V AC)
includes an EU to UK adaptor plug power converter 2 pin 3 pin.

Rechargeable battery power
Includes a rechargeable 6V-5AH battery for mobile use,
with a service time of 25 – 60 hours (depending on use).