Vehicle weighing system composed of two or four platforms and a case-mounted weighing indicator designed to weigh vehicles of any type.

• Low-profile weighing pads (60 mm high)
• Built-in ramps for easy vehicle access
• Two handles and wheels built into the sides of the platforms to facilitate transportation and storage
• Two installation options: floor mounted or built-in to create mobile or permanent weighing stations
• Stainless steel plate to protect the underside of the platform, ensuring resistance and stability at all times.
• Equipped with high quality load sensors.

Weigh axle load

• Two weighing pads, suitable for weighing several axis and adding weigh results using sum function. This function allows PR to weigh vehicles with more than two axis.

Four different dimensions

Available in four different dimensions to adapt to different types of vehicle wheels. To achieve best accuracy, we recommend using the smallest weighing pad dimensions model that fits the wheels of the vehicle to be weighed

MK3 indicator included in a tough, portable carry case. 

• Easy to transport thanks to its design and handle grip.
• Designed to connect up to 4 independent weighing pads
• Built-in rechargeable battery.
• Battery duration of 25/60 hours. Due to the high energy consumption when using the integrated printer, the use of the rechargeable battery is not recommended and the use of the power supply cable is prefereable.

Optional built in printer

• Ticket printing with total weight and weight per axis
• Prints date, time and ticket number
• Customisable ticket with three lines at the start and one at the end of the ticket

Tare function

Reset the balance display to zero after placing a container on the scale. It allows you to tare the container, then proceed to measure only net weight.

• Three types of tare function:
  • Automatic Tare: Press Tare key after placing the container on the scale to reset display to 0. After weighing the product and removing both the product and the container from the scale, display will reset to 0 instead of showing a negative value corresponding to the tared value.
  • Fixed Tare: Press Tare key after placing the container on the scale to reset display to 0. After weighing the product and removing both the product and the container from the scale, display will show a negative value corresponding to the tared container weight. It saves you from applying Tare each time when you want to use the same container to weigh several batches of product.
  • Tare Memory: You can save up to 20 Tare values and apply your desired saved tare value after placing the container with the batch you want to weigh. This is useful when you can’t easily separate the container from the batch, by saving the container tare value you won’t need to place the empty container in the scale before weighing the batch.

Checkweighing (Limits Function)

Set a target weighing range (high and low weight limits) to program the indicator to change its display background to red when the weight is off limits (higher than High value or lower than Low value), while it will change display background to green when the weight is within both weight limits.

Useful application for vehicle checkweighing: A user can easily check the weight of several vehicles: for instance when vehicle is overloaded display turns red, when weight is within limits display turns green. It reduces the number of errors and alleviates the user’s effort when check weighing several vehicles systematically.

Hold mode

Activate this function to visualize the weighing reading after removing the load. One same driver can drive the vehicle onto the platforms, drive off the scale and visualize the weight afterwards.

Two modes:

• Hold last weight: It displays the last stable weight captured until a new load is placed on the scale.
• Hold peak mode: It displays the highest weight captured. Useful to calculate weight impact on the scale.

Security

Lockable keyboard to avoid accidental modification of scale settings. It locks all keys except for Tare, Zero and ON/OFF keys, to be able to operate normally with the scale and at the same time keep the scale protected from accidental configuration changes.

Parts counting (available on request – no additional costs – please contact customer support )

In Piece Counting mode it displays the number of units instead of weight.

The scale has 20 unit weight memories.

Two ways of introducing unit weight:

1. Automatic sampling: Place sample of a few units on the scale, indicate the number of units from the given sample, the scale calculates the unit weight with a simple formula: Sample Unit Weight = Sample Total Weight / Sample Units
2. Input the unit parts weight manually.

*Piece counting function not available for trade approved scales

We offer several possibilities to connect your scale to a computer:

USB Output

Standard USB solution to send weighing data to PC in a reliable way in the background using COM port.

You can use it in three ways:

• Send data to our PW Link PC Software, see below section for more information.
• Send data to our pre-programmed Excel file (provided for free). You don’t need to program anything, just connect the cable to PC, download and open our Excel and it will start to capture your weighing data.
• Program your own solution to send weighing data to your PC using our communication protocols described in the manual.

USB Direct connection cable:

Send weighing data to your PC easily with the USB Direct optional accessory, without the need for any additional software. The cable emulates a keyboard to send weighing values directly to any PC application as if your weighing value was a numerical keyboard input.

Please be aware this option has limitations: You cannot program your PC to capture weigh on the background, neither you can send weighing unit, date or time.

Serial Output & Cable (RS-232)

Serial cable to send weighing data to PC in a reliable way in the background using COM port.

You can use it in three ways:

• Send data to our PW Link PC Software, see below section for more information.
• Send data to our pre-programmed Excel file (provided for free). You don’t need to program anything, just connect the cable to PC, download and open our Excel and it will start to capture your weighing data.
• Program your own solution to send weighing data to your PC using our communication protocols described in the manual.

PW-Link Software:

Powered via cable with 110 – 240V / 50-60 Hz (Euro) 11 VAC

Battery powered service time: 25 – 60 hours (depending on use).