Connect your scale to your local network (PC)
- Network AP SSID: Name of the network (SSID) Enter the name of the WiFi network you want to connect to.
- AP password: Enter the password for the selected network.
- Network IP address: Enter the IP address of the Xtrem device in the selected network. It must be within the range of this network. This data can be assigned automatically with the DHCP option.
- Network DHCP: Automatically assigns an IP address to the Xtrem device if the “ON” option is selected. If “OFF” is selected, the IP must be entered manually.
How to make the appropriate settings with just a few clicks is shown in the video from minute 2:36:
Connect your scale to your local network (app, mobile phone)
With the Xtrem Wifi module you can connect the scale to a local network. It can function simultaneously as an Access Point (AP) and as a Station (STA).
Both operating modes are activated on delivery.
When first used, only the AP mode is functional, which has a very limited range and capacity. To connect the device to your own local network, you must set the connection parameters for the desired WiFi network. This configuration cannot be carried out via the K3X terminal. Alternatively, it can be carried out using two applications:
Step by step instructions:
- access the WiFi network settings of your Android device and select the WiFi network of your Xtrem scale. The initial SSID is GRAM_01 and the password is “12345678”.
- a system message appears within a few seconds after the cccess the WiFi network settingsonnection is established, that the selected network does not allow Internet access. Tap this notification to open the dialogue window.
- confirm that you want to stay connected to the GRAM_01 network even if you do not have Internet access. On some Android versions, an option may appear to memorise this preference: Enable the option to Save this preference to avoid these steps every time you connect to the scale’s access point.
When you open the app for the first time, a screen without a connection to a scale appears:
Tap on the top left hand corner to establish a connection with an Xtrem scale.
The connection screen opens, on which you can the option of saving the connection settings for various Xtrem scales.
When you are connected to the scale, you can access the scale’s configuration options by clicking on the button in the centre of the left-hand side of the screen.
On this settings screen you will find the options for configuring the connection of the Xtrem scale to a WiFi network:
To edit one of these values, tap on the label with the content of the desired setting.
A dialogue window opens for entering or editing configuration information.
Configuration options for connecting the scale to a WiFi network:
| Net SSID | Name of the WiFi network to which the scale should connect. |
| NET PWD | Password for access to the WiFi network |
| NET DHCP (on/off) | Dynamic assignment of the IP address of the scale according to the is connected to the network. |
| IP address | IP address of the scale for input if you prefer a static IP assignment (NET DHCP deactivated). |
Once the desired configuration options have been changed, they will only take effect the next time the scales are restarted. This means that for them to take effect, it is necessary to switch the scale off and on again.
Documents
⤓ Network as STA PC Xtrem (PC)
⤓ Network as STA PC Xtrem (App, Mobile Phone)
